• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Beech D18S Cargo Wheeled Version

Morning all
It's probably just me but I flew the wheeled version of the D-18 recently released and found that I could not cause the autopilot to maintain a heading. Don't recall having this problem in the amphib version. Wondering if anyone else may have experienced this.
Thanks
Warren

Beta version or final version I released late yesterday?

Great work Milton many thanks.
Here autopilot not working fine and no flaps.
Francis

Beta version or final version I released late yesterday?
 
Morning Milton
Unless I have screwed up I am flying the latest version, the one released yesterday - not the beta.
Thanks
Warren
 
Morning Milton
Unless I have screwed up I am flying the latest version, the one released yesterday - not the beta.
Thanks
Warren

Found the "Heading Hold" issue in the aircraft.cfg Autopilot section.

These entries at the bottom of the section need to read as follows:

use_no_default_bank=0
use_no_default_pitch=0
default_pitch_mode=0
default_bank_mode=2 //heading hold
 
Great work Milton many thanks.
Here autopilot not working fine and no flaps.
Francis

Francis, since I have only FSXA, I cannot duplicate the flaps problem; all works fine here with the flaps.

When you say no "No Flaps", do you mean:

1) No mouse readout when pointing at the flap handle;
2) Mouse works, but flap handle does not move;
3) exterior flaps do not move;
4) some combination of the above

Please be specific
 
Hi Milton
In P3D V3.4 when selected my flap indicator moved as expected and I believe that the flight characteristics changed as expected. Bottom line is that at least for me in this sim the flaps are okay. I'll try another flight soon and confirm.
Thanks
Warren
 
Isn't it strange that some of the best BETA testing occurs once the final version is released? :)

I'll update the archive once we get through today and Sunday's downloads and initial reactions.

AFAIK, the heading hold is the only issue but we'll await any further reports.
 
Isn't it strange that some of the best BETA testing occurs once the final version is released? :)

I'll update the archive once we get through today and Sunday's downloads and initial reactions.

AFAIK, the heading hold is the only issue but we'll await any further reports.


It's done to lull you into a sense of false security
icon26.gif
 
Mr. Shupe, I haven't had a chance to thank you for your fs9 to FSX conver...

Your one of the one's that got me hooked on flight sim...

I thank you, great projects and loads of fun :ernaehrung004:

DC
 
Hi Milton
This is a great airplane. Thanks for doing it. I changed the 4 lines in Aircraft .cfg and still could not get the autopilot to hold a heading. I'm pretty accomplished at finger trouble so it may have been me. In any case I copied the entire autopilot section from the amphibian Aircraft .cfg and found that the autopilot would now hold a heading - but - in doing so I'm not sure that the autopilot is responding to pitch input. The "dial" highlights with the mouse and moves appropriately but even with multiple inputs I can only achieve a pitch change with trim. In fact I wondered about this in the Betas of both the amphib and wheeled D-18 but thought was more than likely my own lousy airmanship. In any case it might be something to look at.
I promise to be more diligent in the testing of Betas. I'm more of a "make sure it flies" or "it worked okay yesterday" kind of guy but my wife says I have to be more responsible anyway so I'll start paying attention to all the systems.
Take care
Warren
 
Hi Milton
This is a great airplane. Thanks for doing it. I changed the 4 lines in Aircraft .cfg and still could not get the autopilot to hold a heading. I'm pretty accomplished at finger trouble so it may have been me. In any case I copied the entire autopilot section from the amphibian Aircraft .cfg and found that the autopilot would now hold a heading - but - in doing so I'm not sure that the autopilot is responding to pitch input. The "dial" highlights with the mouse and moves appropriately but even with multiple inputs I can only achieve a pitch change with trim. In fact I wondered about this in the Betas of both the amphib and wheeled D-18 but thought was more than likely my own lousy airmanship. In any case it might be something to look at.
I promise to be more diligent in the testing of Betas. I'm more of a "make sure it flies" or "it worked okay yesterday" kind of guy but my wife says I have to be more responsible anyway so I'll start paying attention to all the systems.
Take care
Warren

Warren, I just have to ask, are you turning on the Lear AP on the knee console?

And, does the AP work okay on the amphibian version?
 
Hi Milton
I am selecting the autopilot on by manipulating the switch immediately to the right of the control column as you face it and that's the only switch I have used.
Now I'm not actually sure about the autopilot pitch control in either machine. I tried it a couple of times through this past week in the betas and I thought it was functioning - in the vague way of the early auto pilots but I'm thinking I may just have been out of trim and the nose pitch movements were as a result of that. Certainly I could not establish any sort of predicted pitch change in the current "final" version. I may re-install the beta and see what I think.
Take care
Warren
 
Just a quick texture mapping question.

I've circled some items that I can't seem to find out where they are in the textures. Roof vents, v-antenna, beacon and nav light housings.

attachment.php


attachment.php
 

Attachments

  • Flt 19-2017-jun-24-007.jpg
    Flt 19-2017-jun-24-007.jpg
    134.3 KB · Views: 1
  • Flt 19-2017-jun-24-006.jpg
    Flt 19-2017-jun-24-006.jpg
    42.6 KB · Views: 1
Hi Milton
I re-installed the beta D-18 and this time, at least for me the autopilot did not work for either pitch or heading - that's in P3D V3.4. Incidentally the flaps worked for me in all of the indicator, aircraft performance and animation.
Thanks for your patience.
Warren
 
Mr. Shupe, I haven't had a chance to thank you for your fs9 to FSX conver...

Your one of the one's that got me hooked on flight sim...

I thank you, great projects and loads of fun :ernaehrung004:

DC

Well DC, that is interesting; and you are welcome. :)
 
Hi Milton
I re-installed the beta D-18 and this time, at least for me the autopilot did not work for either pitch or heading - that's in P3D V3.4. Incidentally the flaps worked for me in all of the indicator, aircraft performance and animation.
Thanks for your patience.
Warren

Warren, I overlooked the pitch setting.

I should explain what these changes are and you can set them for your preference in the Autopilot section:

use_no_default_bank=0 //Leave as zero for the Lear
use_no_default_pitch=0 //Leave as zero for the Lear

default_pitch_mode=1 //1 = pitch hold or 2 = Altitude hold

default_bank_mode=2 // 1 = Wing Level Hold, 2 = Heading Hold (current heading)

EDIT: If you have the Amphibian, these settings also apply to it. It was incorrect as well.
 
Just a quick texture mapping question.

I've circled some items that I can't seem to find out where they are in the textures. Roof vents, v-antenna, beacon and nav light housings.

Willy,

All the light bezels and antennas are mapped to white1.bmp. Are you supposed to repaint antenna housings?

The pitots are mapped to chrome along with a lot of other things like the gear oleos.
 
Willy,

All the light bezels and antennas are mapped to white1.bmp. Are you supposed to repaint antenna housings?

The pitots are mapped to chrome along with a lot of other things like the gear oleos.

Thanks Milton,

That gives me a better idea of how it's all mapped out on the exterior. This one is in a museum so I'm assuming that the reference pics are right. I decided to do it first so I'd have a better idea on to do one that's in a "non-standard" paint scheme.

I was more concerned with what I took to be roof vents. Might have to just chrome them and act like the museum must of got it wrong. Either that or paint it all red. Some times you just have to go with what you've got and dare the rivet counters to say something. I'll blame it on Nigel .
 
Hi Milton
The autopilot seems fine now - thanks - the heading set is very positive but I find the pitch selection a bit vague although in reality so is my flying - all easy to live with. I'll have finally break down and read any documentation about the Lear pilot to find out how the pitch selector works - see if I'm doing something incorrectly.
In any case all good now.
Thanks
Warren
 
Milton.
tested amphibian and wheeled : Lear autopilot by switch : Heading reference is OK, but pitch: no response, only by little trim wheel on the left of autopilot.
Flaps working OK as they should, using lever by scrolling the mouse wheel.
A question: what is "model_interior" file (0 octet) in the plane directory (wheeled version) ?
Sorry for my poor english.

Francis
 
Back
Top