Eliminating Buildings in Scenery

[Mick]

Oops,

Oops, sorry!

I wrote below when I meant above - or the other way round.

Anyway, you seem to have figured it out.

 

[Devildog73]

Thanks guys,

I played with my CFS2 FSSC and made a flatten which took the elevation of the errant airfield down to proper elevation.
I now have 2 grass runways suspended at 121.7 feet elevation, but they are hardly noticeable.

Now to educate myself on placing different hangars than ADE allows in that library.
The ones in ADE are not even close to those used at KMLB.
Between the terminal and next to the start of 27L is a large airline maintenance shop with single door hangar big enough to enclose a 747.
Just south of it is a open front hangar big enough to pull A320s into.
That shop currently has several B737-800/900 MAX sitting there, most AAL because they repaint most or all of American Airlines' aircraft.

Straight north of that shop on the other side of the runway is a charter service with 2 peaked roof single door hangars housing several C414s, Beech 58s/1900s, a Gulfstream or two and a couple of Cessna Citations.

Down on the south side of the airport is Florida Institute of Technology's flight school with several white over red aircraft on the apron.

I have to learn how to use Runway12 or another scenery program to properly place the appropriate buildings and aircraft where they belong for proper "eye-candy".

My summer looks like I am going to be busy!

 

[Mick]

...I now have 2 grass runways suspended at 121.7 feet elevation, but they are hardly noticeable.

If you make a new AFCAD or ADE airport file it will replace the original and those airborne runways will disappear.

...Now to educate myself on placing different hangars than ADE allows in that library.

ADE allows whatever hangars that you want. You just need to study the manual and learn how to add libraries to ADE.

 

[Devildog73]

Runway 12


Okay Guys,

I followed the installation to the T twice.

Here is what I am getting.

I hit continue and there are NO options when I hit the ADD button, nothing, blank dropdown.

 

[Mick]

Okay Guys,

I followed the installation to the T twice.

Here is what I am getting.

I hit continue and there are NO options when I hit the ADD button, nothing, blank dropdown.

What's your operating system? These FS utilities are almost as old as FS, which was developed a couple operating systems ago.

I has programs that worked in XP and won't work in Win7, and from what I've read, there are more than won't work in Win8 and probably even more that won't work in Win10.

I suggest that you try ADE. It definitely works in Win7 and since it's still in widespread use, I suspect that it works in the newer Windows OSs too. Besides, isn't Rwy12 restricted to using Rwy12 object libraries? ADE can use any libraries, though some of them might not show those nice little images of the objects (but you'll still see the footprint on the ADE screen and not need to boot up FS to check the accuracy of your location.)

 

[Motormouse]

You'll need to download the microsoft .net framework runtime files ; from microsoft site , they were not included in win8 and up
each version is a separate install ie they are not cumulative ; so you will need to add 3.5, 4 ,4.5 etc,etc

https://dotnet.microsoft.com/download/dotnet-framework

ttfn

Pete

 

[Devildog73]

My gaming machine is WIN7X64.

I'll read up on adding scenery files to ADE.
I also have SBuilderFS9.

I've had dotnet on my PC for quite some time. I have other programs which need it.
I have all of the net framework updates.

Lee