-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
Hardware Question
- Thread starter Tom Clayton
- Start date
AussieMan
SOH Staff .."Bartender"
3 or 4 suggestions:
1. If you can afford it why not get a 1TB HDD just for flight simming
2. I would go for a minimum 22" monitor.
3. i3 processor is sufficient. That is what I am using with no problems.
4. To run P3D you need a graphics card with a minimum of 4GB ram and supporting DX11 as that is what P3D uses. I have a NVidia GTX670.
5. 6GB of RAM should be sufficient but 8GB is better.
1. If you can afford it why not get a 1TB HDD just for flight simming
2. I would go for a minimum 22" monitor.
3. i3 processor is sufficient. That is what I am using with no problems.
4. To run P3D you need a graphics card with a minimum of 4GB ram and supporting DX11 as that is what P3D uses. I have a NVidia GTX670.
5. 6GB of RAM should be sufficient but 8GB is better.
wombat666
Administrator
What sort of budget are you looking at Tom?
I'd be looking at something like an i7 6700, a Samsung 500GB 850 Evo SSD and an ASUS Z170-AR MoBo for example, depending on your resources
Graphic Cards are a matter of personal choice, a Gigabyte GTX Titan Xtreme might float my boat but is really over kill!
P3D seems to be (like FSX) fairly CPU intensive, and if you use a lot of ORBX scenery (like me!) a 500GB SSD is a must, although I use the 1TB Evo myself ................... I'm into more is better!
Just my 'suggestions' for what they're worth.
I noted Pat suggested a better monitor, my suggested pick of the mid range is the BenQ RL2455HM 24" LED, which runs at 120Hz and is a reasonable price.
I'd be looking at something like an i7 6700, a Samsung 500GB 850 Evo SSD and an ASUS Z170-AR MoBo for example, depending on your resources
Graphic Cards are a matter of personal choice, a Gigabyte GTX Titan Xtreme might float my boat but is really over kill!
P3D seems to be (like FSX) fairly CPU intensive, and if you use a lot of ORBX scenery (like me!) a 500GB SSD is a must, although I use the 1TB Evo myself ................... I'm into more is better!
Just my 'suggestions' for what they're worth.
I noted Pat suggested a better monitor, my suggested pick of the mid range is the BenQ RL2455HM 24" LED, which runs at 120Hz and is a reasonable price.
the amount of ram doesnt matter as P3D is only 32bit program the most it will use is 4gb if your OS is 64bit compared to 2gb if your running a 32bit OS
I have 32GB and the other 28gb are idle
That one is about $400. I'm also looking at a "gaming" laptop with the following:
Intel Core i7-6700HQ
15.6" WXGA Wide LED
1920x1080 Resolution
GTX 960M Graphics
8GB DDR3 Memory
256GB SSD
802.11ac Wireless
HDMI / USB3.0 / Bluetooth
Microsoft Windows 10 HP
1 year ASUS warranty
My current laptop has a 500BG drive that's roughly a quarter full, and my FS9 setup and extra files are about 35 GB combined.
Intel Core i7-6700HQ
15.6" WXGA Wide LED
1920x1080 Resolution
GTX 960M Graphics
8GB DDR3 Memory
256GB SSD
802.11ac Wireless
HDMI / USB3.0 / Bluetooth
Microsoft Windows 10 HP
1 year ASUS warranty
My current laptop has a 500BG drive that's roughly a quarter full, and my FS9 setup and extra files are about 35 GB combined.