Maryadi's MV22B Osprey Rel2.0 released

[menef]

HELLO ! While in the VC left seat I've noticed that the panning speed (using the joystick hat switch) is very low as respect with those obtained in the right seat...
Someone knows if there's some number to change in the cfg to have the Captain more happy and faster in looking around?

 

[rcbarend]

HELLO ! While in the VC left seat I've noticed that the panning speed (using the joystick hat switch) is very low as respect with those obtained in the right seat...
Someone knows if there's some number to change in the cfg to have the Captain more happy and faster in looking around?

The VC right seat is the default VC camera defined in the camera.cfg file, while the left seat VC camera is defined in the aircraft.cfg.
So they are probably different, depending on your defaults.

In my FSX camera.cfg (default) the values are:
PitchPanRate=30
HeadingPanRate=75
PanAcceleratorTime=0

In the aircraft.cfg this (under CameraDefinition.4] this is:
PitchPanRate=20
HeadingPanRate=60

So if you make the numbers the same (and add the line PanAccelerator= ) the pan behaviour of both left/right seat camera's will be the same.

Rob

 

[menef]

The VC right seat is the default VC camera defined in the camera.cfg file, while the left seat VC camera is defined in the aircraft.cfg.
So they are probably different, depending on your defaults.

In my FSX camera.cfg (default) the values are:
PitchPanRate=30
HeadingPanRate=75
PanAcceleratorTime=0

In the aircraft.cfg this (under CameraDefinition.4] this is:
PitchPanRate=20
HeadingPanRate=60

So if you make the numbers the same (and add the line PanAccelerator= ) the pan behaviour of both left/right seat camera's will be the same.

Rob

A big THANK YOU!
It's just what I was looking for

 

[kalong]

Based on research of real VMM 265 dragons VM22 It looks like on the port side of the tail your EP is backwards
unlike picture of real aircraft. Just thought you'd like to know.


Real deal

Your paint of same aircraft

that dragon texture would be from me, I doesn't found left side reference when painting the tail. add note in my to do list

 

[kalong]

OK. The rotor tips blade lights now work, but with the light mode switch on NVG ( not on NORMAL as stated by the manual.)
Formation light still not working.
PFD/MFD/CDU seem work, but I don't have much time to well investigate. ( FULL ROTORS STOW work very well.)
VERY NICE ADDON

that weird rotor tips button behave.
Formation light, not yet working.

 

[rcbarend]

To end the confusion on the Rotor tip lights:
"NORMAL" and "NVG" depends on what you look at: the "printed" text in the texture , or the tooltip. Because they are inversed !

To make the rotor tip light visible, you need to click the LightMode switch: it animates to the NORMAL position, but the Tooltip now says "NVG"

Same problem with BladeMode switch: when you mousewheel it down to BOTTOM, the tooltip now says Top.

So for both switches, the printed text in the texture is correct, the tooltip is not ....

Rob

 

[Victory103]

A video I just finished to show off the model in sim.

https://www.youtube.com/watch?v=Oua6xTJbWI8

Glad to have vid back, where/what scenery for dirt strip?

@kdfw, will your USMC pilot textures (white helmet/tan flightgear) on 2.0?

 

[kdfw]

Glad to have vid back, where/what scenery for dirt strip?

@kdfw, will your USMC pilot textures (white helmet/tan flightgear) on 2.0?

yes, this can be reused http://www.sim-outhouse.com/sohforums/local_links.php?catid=187&linkid=22522

 

[StormILM]

Glad to have vid back, where/what scenery for dirt strip?

It's Camp Mackall & Luzon DZ at Fort Bragg, NC.
The scenery is freeware here: http://www.theairportguys.com/airports/hff.html

 

[Ulrich-Richard]

The last Samurai

salutations , greetings , Gruesse

Ulrich-Richard

 

[euroastar350]

Just want to say a big thank you to everyone involved in this aircraft. I have followed progress since the first previews and I am truly impressed with the work that has been put into this project.

 

[Cinevision]

Excellent work, Maryadi. Still accepting contribution for your team efforts? Let me know. Thx.

 

[rcbarend]

Excellent work, Maryadi. Still accepting contribution for your team efforts? Let me know. Thx.

Yes, he does ...
See page-3 of the FlightManual

 

[rcbarend]

Just a little teaser screenshot of the new Rel2-addon (simularly to my Addon4 for Rel1) that I'm working on ...

Cheers, Rob

 

[Ulrich-Richard]

FSX_MV-22B_v2.0
HMX1

Ulrich-Richard

 

[Victory103]

Awesome StormILM, another real world place to fly my SOC airframes to.

Thanks kdfw, figured it out as I was looking at moving over the old paints, can't have my Marines wearing USAF gear!

@kalong, I have just a couple of things as I re-learn the -22, the autopilot active modes are overlapped displayed on the PFD. Also, VC sound seems to be low, start sounds are normal once I'm up to speed things get quite inflight.

 

[PhantomTweak]

can't have my Marines wearing USAF gear!

HECK NO, you can't!
We'd rather go in our undies than the despised AIR FORCE uniforms.
Although I have to admit, when I was in Clark AB, they had 3 things every Marine wants: Great looking girls, fantastic chow halls, and really wonderful barracks. Who could ask for more?

Amazing work Maryadi! Just incredible.

Rob, that new gauge for sling ops is looking great. Can't wait till I can play with it a bit

Pat☺

 

[Cinevision]

Yes, he does ...
See page-3 of the FlightManual

Copy that.

 

[andy277uk]

Hi Maryadi and Rob,

The model looks fantastic and I am desperate to fly it but.....

Regardless of how I configure the previous aircraft prior to loading, the nacelles remain in horizontal position and refuse to move.

Have combed the manual, tried changing from aileron trim to spoiler axis for control and still nothing.

At a loss. Running P3D v4.1 with registered FSUIPC under Windows 10 on P:\ drive dedicated to P3D

I've got Dino's F-35B and the VTOL gauge works perfectly in that.

Any clue greatly appreciated. Many thanks

Andy

 

[erican2]

Check num lock on keypad if using the keys ctrl + 4 or 6 for aileron trim.