YoYo
SOH-CM-2023
Zsolt, You can turn on/off by switch on right part in the cockpit, check the end of low right panel.
-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
Aeroplaneheaven Helldiver Released!
- Thread starter StormILM
- Start date
Zsolt, You can turn on/off by switch on right part in the cockpit, check the end of low right panel.
YoYo
SOH-CM-2023
two more paints now available at the OZx site:
#205 off the USS Essex
Jankees, maybe second repaint for Essex in old kind style (bu.n. 207)?
SB2C-4.
More:
http://www.asisbiz.com/ships/CV-9-U...07-getting-ready-for-flight-March-1945-01.jpg
http://www.aircraftresourcecenter.com/Rev3/2201-2300/rev2252-VPD48009/00.shtm
https://pl.pinterest.com/pin/329677635195917340/
http://www.hobbysta.pl/curtiss-sb2c-helldiver-172-p-55044.html
ZsoltB
Charter Member
I checked: no other airplane from Aeroplane Heaven has missing glass in DX9. This is a first, and in my opinion a misplaced first one! Either be clear about the DX10 thing, or leave it out. And it wasn't clear.
Cees
Cees
DaveB
Charter Member
Agree Cees. I've just come in from work and read this and I feel like swearing. 'Just turn on DX10 to get it back' is complete rubbish. I don't want DX10.. I don't like DX10 and I'm certainly not going to buy Steve's fixer just to get glass to display in the Helldiver.
If something is going to be made DX10/P2D only, then it should say so. Time for an email to Just Flight me thinks.
ATB
DaveB
If something is going to be made DX10/P2D only, then it should say so. Time for an email to Just Flight me thinks.
ATB
DaveB
WarHorse47
SOH-CM-2024
I'm with you 1000% Cees.I checked: no other airplane from Aeroplane Heaven has missing glass in DX9. This is a first, and in my opinion a misplaced first one! Either be clear about the DX10 thing, or leave it out. And it wasn't clear.
Cees
Did you send your comments in to their "Help Desk" as suggested?
I'm with you 1000% Cees.
Did you send your comments in to their "Help Desk" as suggested?
I bought this one from JF, as always.
Cees
Hmm. My point is that I didn't read anywhere in this:
System Requirements:
- Flight Simulator X (with SP2/Acceleration), FSX: Steam Edition & P3D v2/v3 (compatible)
- 2GB RAM minimum
- 512MB graphics card
- Windows 10 / 8 / 7 / Vista / XP SP3
- 488MB hard drive space
that I'd need DX10!
Cees
This post was COMPLETELY IGNORED, so I'll post it again.
Cees
WarHorse47
SOH-CM-2024
Still, you can send them your comments directly. Either use the comment form on the Aeroplane Heaven site or the e-mail address at the bottom of the page.
Done.
Dear sir, madam,
I bought this plane recently and found out that DX10 is required for the plane to appear properly in FSX. This is not mentioned in the system requirements, and this plane is thus not a product that I would have bought, knowing this. Unless AH corrects this issue, I would like to have my money back. A plane without glass is not what I'd expect from payware.
Kind regards,
Cees Donker
Dear sir, madam,
I bought this plane recently and found out that DX10 is required for the plane to appear properly in FSX. This is not mentioned in the system requirements, and this plane is thus not a product that I would have bought, knowing this. Unless AH corrects this issue, I would like to have my money back. A plane without glass is not what I'd expect from payware.
Kind regards,
Cees Donker
bazzar
Charter Member 2018
I am deeply disappointed that after knowing each other for so many years, you all feel unable to talk to me directly. Only one person, who will remain nameless has done so and we are resolving the issue. All you had to do was contact us at our help desk or email me personally. A fix will be available this coming week after working on the effect issue.
As a result, I am withdrawing from this forum permanently and will not be available. If you wish to contact me directly, please email me or use the contact form or use the help desk address which is at the bottom of the page. Mike has already left and will also not be available.
A sad and disappointing end. Thankyou all.
As a result, I am withdrawing from this forum permanently and will not be available. If you wish to contact me directly, please email me or use the contact form or use the help desk address which is at the bottom of the page. Mike has already left and will also not be available.
A sad and disappointing end. Thankyou all.
I am deeply disappointed that after knowing each other for so many years, you all feel unable to talk to me directly. Only one person, who will remain nameless has done so and we are resolving the issue. All you had to do was contact us at our help desk or email me personally. A fix will be available this coming week after working on the effect issue.
As a result, I am withdrawing from this forum permanently and will not be available. If you wish to contact me directly, please email me or use the contact form or use the help desk address which is at the bottom of the page. Mike has already left and will also not be available.
A sad and disappointing end. Thankyou all.
Hi Bazzar,
I have always enjoyed your comments. Life is to short to have something like this, cause you to leave the forum. A lot of people in this day and age just don't understand common courtesy. I also expect a lot of others didn't want to cause you to have to be continually answering questions.
Please stay with us.
Tom
Roger
Senior Administrator
Baz, what you have to understand is that to many people this is their second home (after their real home that is
) and consequently state their gripes and their plaudits here. It has also been your second home too (after AH) and I'm sure that our members appreciate your presence here. However the Dx9 guys do have a point and the better course of action would be just to come up with the fix and let it go. I feel sure that after a cooling off period you and Mike will return here and bask in the glory of satisfied customers which is how it should be.
) and consequently state their gripes and their plaudits here. It has also been your second home too (after AH) and I'm sure that our members appreciate your presence here. However the Dx9 guys do have a point and the better course of action would be just to come up with the fix and let it go. I feel sure that after a cooling off period you and Mike will return here and bask in the glory of satisfied customers which is how it should be.Zolt, the green for the Australian ones were painted in the US olive drab as we only took the first 10 of the original order, they where shipped here already painted green as they were ex USAAF, then we slapped the thick band 2 tone ww2 roundel on (which you have)
not long after arriving in Australia, we canceled the order for the shrikes
the one you painted A69-29 left the factory new and it was requested after it was completed it was to be photographed with RAAF roundels for Australian reference and then it was handed back, it never left the country
A late family friend who a was aircrew with the initial shrikes is the source of this info
YoYo
SOH-CM-2023
Oh no. Baz please stay here. Maybe some of people too much confused this forum as direct support of AH and it was too much pressure in some of kind sentences and You don't feel right with this.
AH always has and had very good support and the choice of models was always good and interesting. Please PM to him. Its a bad news :\.
btw. from AH's FB:
-----------------------------
Thank You for this! Downloaded new version from PCAviator: is ok now for me (P3D):
Hi Baz,
No need to allow actions of others to dictate your own decisions. There are many here including me, who do not want to see anyone leave the Forums for whatever the reason (perceived injustice not withstanding). Having direct access to the folks like yourself who do the building enhances the SOH experience and makes this site different from all the others. That being the case, I'm simply suggesting you shrug it off and stick around. Your leaving will leave an "unfillable" hole. Not trying to tell anyone what they should do, just throwing it out there for your consideration. Perhaps you just need to let this one "slide on by".
mal
No need to allow actions of others to dictate your own decisions. There are many here including me, who do not want to see anyone leave the Forums for whatever the reason (perceived injustice not withstanding). Having direct access to the folks like yourself who do the building enhances the SOH experience and makes this site different from all the others. That being the case, I'm simply suggesting you shrug it off and stick around. Your leaving will leave an "unfillable" hole. Not trying to tell anyone what they should do, just throwing it out there for your consideration. Perhaps you just need to let this one "slide on by".
mal