• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Accu-feel from a2a?

R

rayhere48

Charter Member
Does anyone know if Accu-feel from a2a will work in P3D. I have looked around and so far have not seen any thing on this subject. I know as soon as I post this question I will most likely find my answer. So I have to say I am sorry for wasting the forums time on this.
 
What would I have get to install it in p3d. I know in fsx that you need the toolbox. Sorry for all the questions. I was looking at A2A and p3d forums and nothing about ac and p3d.
 
I had Accu-feel working with FSX before it quit working and I switched to P3D. Tried to instal it but no dice... Think it's got something to do with the DLL.XML file not allowing the DLL to run.
 
Works fine for me in P3D. Use the migration tool...still had to add the .dll entry manually.
Again, works fine.
 
Here is my dll.xml

<?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="Launch" version="1,0">
<Descr>Launch</Descr>
<Filename>dll.xml</Filename>
<Disabled>False</Disabled>
<Launch.ManualLoad>False</Launch.ManualLoad>
<Launch.Addon>
<Name>ObjectFlow_CBB7_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_CBB7\Scenery\ObjectFlow_CBB7_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_SAK_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_NA_SAK05_SCENERY\scenery\ObjectFlow_SAK_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_EGHA_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_EU\FTX_AA_EGHA\Scenery\ObjectFlow_EGHA_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_EGTR_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_EU\FTX_AA_EGTR\Scenery\ObjectFlow_EGTR_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_EGHP_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_EU\FTX_AA_EGHP\Scenery\ObjectFlow_EGHP_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>iFly Menu</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\Modules\iFly737NG.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_EGTH_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_EU\FTX_AA_EGTH\Scenery\ObjectFlow_EGTH_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_PAKT_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_PAKT\Scenery\ObjectFlow_PAKT_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_KBVS_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_KBVS\Scenery\ObjectFlow_KBVS_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_KCMW_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_KCMW\Scenery\ObjectFlow_KCMW_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_1WA6_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_1WA6\Scenery\ObjectFlow_1WA6_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_74S_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_74S\Scenery\ObjectFlow_74S_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_W52_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_W52\scenery\ObjectFlow_W52_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_7S3_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_7S3\Scenery\ObjectFlow_7S3_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_S43_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_S43\Scenery\ObjectFlow_S43_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_2W3.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_2W3\Scenery\ObjectFlow_2W3_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_0S9_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_0S9\scenery\ObjectFlow_0S9_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_77S_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_NA\FTX_AA_77S\Scenery\ObjectFlow_77S_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_OR57_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_NA\FTX_AA_OR57\Scenery\ObjectFlow_OR57_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_PAKT.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_NA\FTX_AA_PAKT\Scenery\ObjectFlow_PAKT_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_S43.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_NA\FTX_AA_S43\Scenery\ObjectFlow_S43_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_W52.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_NA\FTX_AA_W52\scenery\ObjectFlow_W52_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_YBAS.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_AU\FTXAA_YBAS\Scenery\ObjectFlow_YBAS_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_YBCS.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_AU\FTXAA_YBCS\scenery\ObjectFlow_YBCS_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_YMML_P3D.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_AU\FTXAA_YMML\Scenery\ObjectFlow_YMML_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_CYBD_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_CYBD\Scenery\ObjectFlow_CYBD_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_KSFF_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_KSFF\Scenery\ObjectFlow_KSFF_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_YWOL_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_AU\FTXAA_YWOL\Scenery\ObjectFlow_YWOL_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_EGKA_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_EU\FTX_AA_EGKA\Scenery\ObjectFlow_EGKA_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_CEN4_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_CEN4\Scenery\ObjectFlow_CEN4_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_EGSG_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_EU\FTX_AA_EGSG\Scenery\ObjectFlow_EGSG_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_EGHR_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_EU\FTX_AA_EGHR\Scenery\ObjectFlow_EGHR_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_KJAC_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NA\FTX_AA_KJAC\Scenery\ObjectFlow_KJAC_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_NZNI_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_NZ\FTX_NZNI_05_SCENERY\scenery\ObjectFlow_NZNI_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_YMML.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_AU\FTXAA_YMML\Scenery\ObjectFlow_YMML_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_YWOL.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Microsoft Flight Simulator X\ORBX\FTX_AU\FTXAA_YWOL\Scenery\ObjectFlow_YWOL_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_YBCS_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_AU\FTXAA_YBCS\scenery\ObjectFlow_YBCS_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>ObjectFlow_YBAS_P3D</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>D:\Prepar3D\ORBX\FTX_AU\FTXAA_YBAS\Scenery\ObjectFlow_YBAS_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Object Placement Tool</Name>
<Disabled>True</Disabled>
<ManualLoad>False</ManualLoad>
<Path>..\Microsoft Flight Simulator X SDK\SDK\Mission Creation Kit\object_placement.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Traffic Toolbox</Name>
<Disabled>True</Disabled>
<ManualLoad>False</ManualLoad>
<Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Traffic Toolbox SDK\traffictoolbox.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Visual Effects Tool</Name>
<Disabled>True</Disabled>
<ManualLoad>False</ManualLoad>
<Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Special Effects SDK\visualfxtool.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>A2A Feel</Name>
<Disabled>False</Disabled>
<Path>Modules\A2A_Feel.dll</Path>
<DllStartName>module_init</DllStartName>
<DllStopName>module_deinit</DllStopName>
</Launch.Addon>
<Launch.Addon>
<Name>AccuFeelMenu</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>Modules\AccuFeelMenu.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>G500</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>Gauges\G500.dll</Path>
<DllStartName>module_init</DllStartName>
<DllStopName>module_deinit</DllStopName>
</Launch.Addon>
<Launch.Addon>
<Name>FSUIPC 4</Name>
<Disabled>False</Disabled>
<Path>Modules\FSUIPC4.dll</Path>
</Launch.Addon>
</SimBase.Document>

You will find your dll.xml file in C:\Users\your name\AppData\Roaming\Lockheem Martin\P3d. That is assuming you are using Windows 7 or 8

Just copy the bit that is in red and paste it into your dll.xml.
 
Got it installed and it loads but no joy in it even working. I open the menu and the program is off. I select an aircraft and it won't read the cfg file and every variable is off. I set them manually and still no go... Ohh well. I liked it when FSX actually worked on my machine.
 
Brian................check out the threads on Pg. 5/ Accufeel

I had the exact same problem but Ole Boy and Dangerous Beans got me straight......
 
You must log in or register to reply here.
Back
Top