Adjusting Eyepoint in CFS-3

[JohnCT-4]

I've got some a/c in CFS3 which need the eye point moved back a bit. I found some CFS 2 instructions, but they are not relevant. Can someone poit me to the files I need to adjust please?

Thanks

JOhn

 

[Daiwilletti]

Hi JohnCT-4,

Not sure but I'd look first in the aircraft's xdp file. Just before the loadouts section, you will see gunner seat and pilot seat specifications, I suspect you can position the pilot in this part of the xdp. Every time I look at this section is seems pretty complex, so gently does it! Make a back-up before editing. Also remember to delete the bdp file when you want to test the edited xdp file.

HTH,

 

[MajorMagee]

I've never been able to find a way to do it.

 

[Pat Pattle]

AFAIK you need the source pit file to modify this. The only work around is to set up your Cfs3 eyepoint commands - up down left right forward backwards. This will affect all a/c of course but there's also a reset eyepoint command.

 

[gosd]

AFAIK you need the source pit file to modify this. The only work around is to set up your Cfs3 eyepoint commands - up down left right forward backwards. This will affect all a/c of course but there's also a reset eyepoint command.

How can I access the Cfs3 eyepoint commands?

 

[popsaka]

You know... you hit "scroll lock" on yer keyboard and then ya' can swim/pan around in the pit
with your joystick tophat or the directional keys in 'numpad' and then snap back by
hitting "scroll lock" again and bumping any numlock arrow or your tophat button... also
pan back away with [ & ] ... (your zooming brackets)
hope this helps

 

[MajorMagee]

That let's you look around, but does not actually change the x, y, z location of where you're looking from. In some models the eye point is incorrectly located such that you're trying to look out from way too low of a seat position, or from inside a solid part of the model. It's these situations where being able to actually move the eye point would be handy.

 

[Pat Pattle]

How can I access the Cfs3 eyepoint commands?

I'm not in front of my home pc right now but in the key assignments, go to the view commands and in there you can assign keys to move the eye-point. I have the home/page down etc. keys next to the number pad assigned.

Viewpoint left and right is particularly useful when taxiing in tail draggers as it allows you to 'lean' out of the cockpit and see where you're going (as the real pilots had to do).

 

[greycap.raf]

The eyepoint can be changed. It takes a bit of XDP editing but hey - what doesn't require fiddling in this game?

In the <Views> section there are the different view directions. Find the line that looks like

<View Event="HeadStop"/>

and change it to

<View Event="HeadStop" X="0" Y="0" Z="0.1"/>

and lo and behold, your seat has moved. I don't remember which direction that one changes it but 0.1 means a 10 cm change, CFS3 is metric in that regard. The catch is that it won't take effect immediately, only after you've looked into some other direction and returned to the forward view. And this is with the "snap view", no idea if it works with the smooth panning or TrackID.

 

[Daiwilletti]

The eyepoint can be changed. It takes a bit of XDP editing but hey - what doesn't require fiddling in this game?

In the <Views> section there are the different view directions. Find the line that looks like

<View Event="HeadStop"/>

and change it to

<View Event="HeadStop" X="0" Y="0" Z="0.1"/>

and lo and behold, your seat has moved. I don't remember which direction that one changes it but 0.1 means a 10 cm change, CFS3 is metric in that regard. The catch is that it won't take effect immediately, only after you've looked into some other direction and returned to the forward view. And this is with the "snap view", no idea if it works with the smooth panning or TrackID.

thanks, greycap.raf, that will save a lot of time. I will certinly experiment with this, I often find eyepoints a bit unsatisfactory.

 

[MajorMagee]

The catch is that it won't take effect immediately, only after you've looked into some other direction and returned to the forward view. And this is with the "snap view", no idea if it works with the smooth panning or TrackID.

After a bit of experimenting I now understand why I didn't think that edits to the xpd HeadStop position worked when I tried them in the past.

I use TrackIR, and that disables the snap view functions in the cockpit. Without being able to change the view it never resets the HeadStop to the new X, Y, Z location.

If you pause TrackIR or lose connection with the reflectors then snap view starts working again and the HeadStop location moves, but as soon as TrackIR reconnects it goes back to the model default location.

 

[popsaka]

Sorry, lads... I forgot all about 'ctrl+enter' which in many cases can move you a bit too far back...