• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

F/A-18A-D Hornet (Legacy) for FSX

Also: "Auto Flaps" only covers a narrow range of flaps. And flaps are useful for landings. Especially on carriers.

Hey guys, still working out some of these bugs. As for the flaps, they are per NATOPS with an normal auto flap max range of about 20-25 degrees. 30 degrees for HALF and 45 degrees for FULL.

We are still working primarily on FCS control logic and making some good progress. Updates to be release soon.

Thanks for the continued feedback and support.

-Jimi
 
Any chance for at least minimal documentation on the intricacies of the model?

Something like you guys did for the MCP regarding setting radio channels.

The cockpit is pretty self-explanatory if you can fly a F-16, but the flap operation stuff wasn't noted anywhere.
Also, I still don't know what exactly the auto-trim stuff (that you've tied to the pitot switches) is supposed to do.
 
Any chance for at least minimal documentation on the intricacies of the model?

Something like you guys did for the MCP regarding setting radio channels.

The cockpit is pretty self-explanatory if you can fly a F-16, but the flap operation stuff wasn't noted anywhere.
Also, I still don't know what exactly the auto-trim stuff (that you've tied to the pitot switches) is supposed to do.

Manual is currently in the works. Not sure which version you currently have, but auto-trim automatically kicks on once the jet is in Up and Away (UA) mode. The mode is usually set when flaps are set to AUTO (Up position) and Speed is above 240 KCAS. I think its also the gear that triggers it in that version as well. There is nothing you have to do manually to activate it. It's automatic. Basically the system automatically trims the jet to 1 G once the stick is released, thereby cancelling the need to manually trim the jet to hold a certain pitch attitude. It will do this all the way up to 22 degs AOA. It also disengages once the gear is lowered

Auto trim is not tied to the pitot switch in this version.

Hope this helps.

-Jimi
 
The latest "official" release of Jimi's (and his amazing team!) Hornet is the v16.1, and it works wonderfully!
Look in Jimi's sig for the link to it. If you can't find it, I'll post the link for you all.
Comes with an autoinstaller that permits you to choose the "loadout(s)" you desire to fly. Clean, with no pylons or external tanks, Training, with pylons and a centerline tank, A-A, with AIM-9 and AIM-120 missiles, A-G, with several different types of bomb loads, etc etc. The autoinstaller will install several folders for you, like a Base folder, required for all loadouts, and a folder for each individual load. Saves a lot of HD space doing it that way. The autoinstaller will also install the correct ,NET Framework version required by the Hornet_FCS.dll file to function.
Please note: during the .NET Framework installation, the computer may seem to freeze up, or lock up. It's not. The install is functioning correctly, it just takes while. Just let it run until it's finished. This file is vital to correct functioning of the FCS systems, so make sure you install it.
As to use of the flaps: Please note that the switch in the cockpit is eye-candy ONLY. It doesn't affect the flaps in the least. Use the default keys, F5-F8, to control the flaps, or assign joystick button(s) to the function. Use Flaps 1/2 (first step down, or F6) for take-off, and Flaps Full (2nd step down, or F8) for landing. After you get the plane into the air and climbing, retract the gear and flaps (F5) and fly away! And a real joy to fly away it is, too!
Make sure the aircraft gross weight is below 33k lbs for landing aboard the boat. If using an overhead recovery, approach the boat/runway close aboard to starboard, on the BRC, 800'AGL, 350 KIAS. As you pass the bow, make a level break turn, reduce the throttle to idle, and extend the speed-brake. As the plane slows below 250 KIAS (about 1/2 way through the turn to downwind), extend the gear and select Flaps Full. The plane will trim to 8.1° nose up, which is the correct pitch trim for landing. Control your sink rate with the throttle. Speed in the groove should be about 135 or so, with a sink rate of 700-800 fpm. The different boats have different ILS frequencies, with 47X for the default, 57X for the Nimitz v2, and so on. You can turn the ILS needles on with the HUD Control panel.
I just love this plane! I use the Training loadout, as with the centerline tank, I can fly a while, do aerobatics, ACM, etc, and then come down, place a boat with AICarriers (the .NET version!), set it in motion, and set the wind at about 10 Kts down the angle, for a WOD of 35 Kts, which is the correct amount of wind for the plane to trap. Then I can do carrier practice as long as I want. Which I do :D
If I'm feeling masochistic that day, I load up the vLSO program, too. I personally believe they have it in for me.

Great plane, and the AICarriers and such just make it a better experience.

Enjoy it all!
Pat☺
 
CaptinSim F/A-18D Hornet

That is beautiful work! What are you modeling in and what is your poly count, just out of curiosity. Will you be going payware or freeware. I will be looking forward to a release.


Can someone please share with me the installer to install the captin sim F/A-18D to my sim?
 
Back
Top