• There seems to be an up tick in Political commentary in recent months. Those of us who are long time members of the site we know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religiours commentary out of the fourms.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politicion will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment amoung members. It is a poison to the community. We apprciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Flight plan error driving me insane

M

Miggers

Members +
Trying to get TTools to compile,but it gives the same error(the altitude format is bad should be 0 to 1023)on all these entries:

AC#24,DIAFS,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/18:48,040,R,0000,EDMA
AC#25,DMSGB,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/18:58,040,R,0000,EDOI
AC#26,GAPRR,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/19:10,040,R,0000,EGTH
AC#27,DFONL,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/19:15,040,R,0000,EHLE
AC#28,ESCAD,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/17:45,040,R,0000,LFLY
AC#29,PHKHV,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/18:20,040,R,0000,EHGR
AC#30,FEZEJ,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/19:15,040,R,0000,LFPM
AC#40,GVTAL,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/19:20,040,R,0000,EGBW
AC#41,HBCKA,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/16:20,040,R,0000,LSZK
AC#42,DEKUT,50%,WEEK,VFR,6/07:35,030,R,0000,EDST,6/17:00,040,R,0000,EDLP
AC#43,DIAFS,50%,WEEK,VFR,6/06:30,030,R,0000,EDST,6/18:20,040,R,0000,EDTN
AC#44,HBLAQ,50%,WEEK,VFR,6/06:30,030,R,0000,EDST,6/18:30,040,R,0000,LFSB
AC#45,DICDY,50%,WEEK,VFR,6/06:30,030,R,0000,EDST,6/18:02,040,R,0000,EDHE
AC#46,DIRES,50%,WEEK,VFR,6/06:35,030,R,0000,EDST,6/18:07,040,R,0000,EDHE
AC#47,GAORG,50%,WEEK,VFR,6/06:35,030,R,0000,EDST,6/16:20,040,R,0000,EGJJ
AC#48,OKMJN,50%,WEEK,VFR,6/06:35,030,R,0000,EDST,6/16:25,040,R,0000,LKVY
AC#49,OKLKO,50%,WEEK,VFR,6/06:25,030,R,0000,EDST,6/16:15,040,R,0000,LKCM
AC#50,OKCTB,50%,WEEK,VFR,6/06:00,030,R,0000,EDST,6/16:05,040,R,0000,LKTB
AC#51,OKRFG,50%,WEEK,VFR,6/06:00,030,R,0000,EDST,6/16:10,040,R,0000,LKPD
AC#52,DMWZY,50%,WEEK,VFR,6/06:00,030,R,0000,EDST,6/16:25,040,R,0000,LKPR
AC#53,OYBGT,50%,WEEK,VFR,6/05:45,030,R,0000,EDST,6/17:00,040,R,0000,EKBO
AC#54,OYFAW,50%,WEEK,VFR,6/05:50,030,R,0000,EDST,6/17:20,040,R,0000,EKSW
AC#55,FOATC,50%,WEEK,VFR,6/05:30,030,R,0000,EDST,6/17:23,040,R,0000,LFLY
AC#56,OOCJS,50%,WEEK,VFR,6/05:15,030,R,0000,EDST,6/18:35,040,R,0000,EBBL
AC#57,PHOTA,50%,WEEK,VFR,6/05:00,030,R,0000,EDST,6/18:50,040,R,0000,EHGR
AC#58,DEFTX,50%,WEEK,VFR,6/07:15,030,R,0000,EDST,6/18:52,040,R,0000,EDFM
AC#59,DEQXL,50%,WEEK,VFR,6/07:15,030,R,0000,EDST,6/19:00,040,R,0000,EDLP
AC#60,N46557,50%,WEEK,VFR,6/07:30,030,R,0000,EDST,6/18:58,040,R,0000,EDLN
AC#61,DFMCA,50%,WEEK,VFR,6/07:00,030,R,0000,EDST,6/19:05,040,R,0000,EDFM
AC#62,FGKJT,50%,WEEK,VFR,6/07:00,030,R,0000,EDST,6/15:55,040,R,0000,LFLV
AC#63,FGGKK,50%,WEEK,VFR,6/07:00,030,R,0000,EDST,6/16:07,040,R,0000,LFBR
AC#64,N473DC,50,WEEK,VFR,6/07:00,030,R,0000,EDST,6/19:05,040,R,0000,EGSX

It's highlighting the first "R"just behind the first altitude designator(030)in red as though that is the problem.
I've done another set in exactly the same format and it's swallowed that no problem.
It's driving me absolutely nuts trying to figure it out because I just cannot spot the problem.
 
I'm a little rusty on TTools, but have you tried to parse it through something like AIFP? Even if you didn't compile with it, it could probably at the very least verify the error.

When you say another "set," what exactly is different this time around? What have you changed here that would be different? Maybe substituting something one by one can give you a different answer?

Also, I noticed the altitude was "030" for a VFR flightplan. Again, I'm rusty on TTools, but will it let you compile something like that where the altitude doesn't match the flightplan type? For IFR the "030" would be fine, otherwise "035" would be correct for VFR. Don't know if TTools makes you correct that or not, especially if you say it's worked before.

Also, I can't remember if this is a TNG type flight or not. If you use TNG, then you have to use the IFR option or it may not work. With IFR the aircraft will do a low pass then go around. If you have VFR, then the aircraft will land, stop, then take off again. If there isn't enough runway it won't work. I'm not sure if TTools checks for this as well or not.

Hope this helped!

Jorge
Miami, FL
 
Your FP should look like that:

AC#24,DIAFS,50%,WEEK,VFR,6/05:50,030,6/10:00,030,R,0000,EDST,6/18:48,6/18:48,040,R,0000,EDMA

The bold marked entries are simply missing. It doesn't matter what time your insert. TTools will calculate and set arrival times anyway.

Bernard
 
Last edited:
leuen said:
Your FP should looks like that:

AC#24,DIAFS,50%,WEEK,VFR,6/05:50,030,6/10:00,030,R,0000,EDST,6/18:48,6/18:48,040,R,0000,EDMA

The bold marked entries are simply missing. It doesn't matter what time your insert. TTools will calculate and set arrival times anyway.

Bernard
Click to expand...

Of course,of course!!!!!,I haven't put an ETA in!!!

Thanks Bernard.
 
You must log in or register to reply here.
Back
Top