• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Help required please

A

Adger

Members +
Hi all thanks to everyone who continues to make the old girl better..I fly WOTR and WOFF BHAH II+OTT expansion.

Iv'e just returned to have a nosy at CFS3 addons etc but im running into a concurrent issue. No matter what add-on i install i get a "Configuration Override file is out of date" message when using APPDATA files from the theatres im downloading. Just to add this issue doesn't occur with stock CFS3 .

Any help/advice would be most welcomed. Im literally at my wits end with this issue. Many thanks have a wonderful day. (y)
 
Hi Major thanks for the reply. Yes sir i have..I'll keep persisting cheers

Edit: managed to get it working but i have "lines" across the terrain a issue with something in the config file perhaps? thanks
 
Last edited:
After every new install, and after you have run MultiCFS3.exe to register the new install, you should always run the cfg.exe file to maximize the configuration. assuming that you have a good PC, then go to your AppData folder, find the relevant install folder, and change the ConfigOverrides.xml to what I believe is MajorMagee's version like this. Copy from <TextureLimits> down to the bottom. Above that. the only thing possibly to change is the line
<MultisampleType val="D3DMULTISAMPLE_4_SAMPLES"/>


<Config>
<FileVersion val="60"/>
<Adapter val="0"/>
<Device val="0"/>
<Mode val="17"/>
<MultisampleType val="D3DMULTISAMPLE_4_SAMPLES"/>
<VendorId val="4318"/>
<DeviceId val="5058"/>
<VersionNumberLowPart val="0"/>
<VersionNumberHighPart val="589824"/>

copy from here
Code: 
<TextureLimits>
        <aircraftmodels Scale="0" MaxDim="0"/>
        <compositeterrain Scale="0" MaxDim="0"/>
        <compositeterrainsource Scale="0" MaxDim="0"/>
        <effects Scale="0" MaxDim="0"/>
        <hud Scale="0" MaxDim="0"/>
        <nonaircraftmodels Scale="0" MaxDim="0"/>
        <precompiledterrain Scale="0" MaxDim="0"/>
        <shadows Scale="0" MaxDim="0"/>
        <ui Scale="0" MaxDim="0"/>
        <uncategorized Scale="0" MaxDim="0"/>
    </TextureLimits>
    <ConfigOverrides>
        <DisableWarningBoxes val="n"/>
        <DisableSound val="n"/>
        <DisableIntroMovie val="y"/>
        <DisableMovieUI val="n"/>
        <DisableUIAnimations val="n"/>
        <SafeMode val="n"/>
        <NoDXT1 val="n"/>
        <NoDXT3 val="n"/>
        <NoDXT5 val="n"/>
        <DisableIndexBuffers val="n"/>
        <DisableVertexBuffers val="n"/>
        <Disable1600x1200 val="n"/>
        <Disable1280x1024 val="n"/>
        <Disable1024x768 val="n"/>
        <DualPassRender val="n"/>
        <HighResolutionZBuffer val="y"/>
        <TerrainDetailTexture val="y"/>
        <DisableWindowed val="n"/>
        <DisableValidateDevice val="y"/>
        <DisableWriteOnlyVB val="n"/>
        <DisableWriteOnlyIB val="n"/>
        <DisableTriangleStrips val="n"/>
        <UnsupportedHardware val="n"/>
        <UnsupportedDriver val="n"/>
        <DisableCompositeTerrainTextureMips val="n"/>
        <DisableCompositeTerrainTextures val="n"/>
        <DisableCompositeGroundPlaneTextures val="n"/>
        <DisableCompositeAircraftTextures val="n"/>
        <DisableScenery val="n"/>
        <DisableEnvironmentMapping val="n"/>
        <DisableShadows val="n"/>
        <DisableWhiteOut val="n"/>
        <DisableTerrainLighting val="n"/>
        <DisableSceneryLighting val="n"/>
        <DisableSun val="n"/>
        <DisableStars val="n"/>
        <DisableRenderText val="n"/>
        <DisableLabels val="n"/>
        <DisableTacticalDisplay val="n"/>
        <DisableTargetCone val="n"/>
        <DisableHUD val="n"/>
        <DisableChat val="n"/>
        <DisableAdvisor val="n"/>
        <DisableSimWarnings val="n"/>
        <DisableTimeCompress val="n"/>
        <DisableWeather val="n"/>
        <DisableClouds val="n"/>
        <DisableBlendToOffscreen val="n"/>
        <DisableClear val="n"/>
        <DisableTerrainRender val="n"/>
        <DisableTerrainUpdate val="n"/>
        <DisableSceneDBRender val="n"/>
        <DisableWaterRender val="n"/>
        <DisableWaterShorelineRender val="n"/>
        <DisableWaterReflectionRender val="n"/>
        <DisableWaterAnimationRender val="n"/>
        <DisableTerrainTextureRingBlend val="n"/>
        <DisableFog val="n"/>
        <DisableRain val="n"/>
        <DisableTexturedAlphaMaterial val="n"/>
        <DisableShellCasings val="n"/>
        <DisableTerrainDiffuseLighting val="n"/>
        <DisableTerrainDecalRender val="n"/>
        <DisableVCFog val="n"/>
        <DisableInCloudEffect val="n"/>
        <DisablePropDiscs val="n"/>
        <CompositeAircraftTextureBudget val="10240"/>
        <CompositeAircraftTextureMaxDim val="4096"/>
        <CompositeAircraftTexturePool val="D3DPOOL_DEFAULT"/>
        <CompositeAircraftTextureUsage val="D3DUSAGE_RENDERTARGET"/>
        <CompositeTerrainTextureBudget val="five"/>
        <VertexBufferPool val="D3DPOOL_DEFAULT"/>
        <IndexBufferPool val="D3DPOOL_DEFAULT"/>
        <PreCompiledTerrainTextureBudget val="five"/>
        <UserShadowTextureBudget val="1"/>
        <AIShadowTextureBudget val="30"/>
        <ObjectShadowTextureBudget val="500"/>
        <UserShadowSize val="512"/>
        <AIShadowSize val="512"/>
        <ObjectShadowSize val="512"/>
        <MaxParticles val="2000000"/>
        <ZBiasBitsResolution val="15"/>
        <ZBiasTerrainDecal val="0"/>
        <ZBiasWaterPolyNear val="1"/>
        <ZBiasWaterPolyFar val="0"/>
        <ZBiasWaterLineNear val="1"/>
        <ZBiasWaterLineFar val="0"/>
        <ZBiasFlatEffects val="25"/>
        <ZBiasShadow val="0"/>
        <ZBiasTerrainAlphaNear val="0"/>
        <ZBiasTerrainAlphaFar val="0"/>
        <ZBiasObject val="0"/>
        <ZBiasObjectFar val="0"/>
        <ZBiasEffects val="1"/>
        <ZBiasClouds val="1"/>
        <TerrainVertexBufferCapacity val="65536"/>
        <TerrainIndexBufferCapacity val="65536"/>
        <VertexCacheSize val="64"/>
        <BackClipDist val="128748"/>
        <InteriorWaterLoadingFactor val="1"/>
        <WaterDetailTextureSize val="5"/>
        <WaterElevationBias val="4"/>
        <WaterElevationBiasFactor val="0.5"/>
        <NearPassBackClipDist val="1000"/>
        <FarPassNearClipDist val="10000"/>
        <FogStartDist val="10000"/>
        <CloudScale val="10"/>
        <TerrainBestImageQuality val="0"/>
        <MaxLandClassVariations val="0"/>
        <TerrainMaxBlenderInstPerFrameNear val="8192"/>
        <TerrainMaxBlenderInstPerFrameFar val="8192"/>
        <SceneryTriangleBudget val="five"/>
        <TerrainTriangleBudget val="five"/>
        <MaxModelLOD val="100"/>
        <FullscreenSwapEffect val="D3DSWAPEFFECT_DISCARD"/>
        <CompositeTerrainTexturePool val="D3DPOOL_DEFAULT"/>
        <CompositeTerrainTextureUsage val="D3DUSAGE_RENDERTARGET"/>
        <TextMaxTextures val="0"/>
        <OverallGraphicDetail val="5"/>
        <AircraftDetail val="5"/>
        <SceneryDetail val="5"/>
        <TerrainDetail val="5"/>
        <EffectsQuality val="5"/>
        <CloudsQuality val="5"/>
    </ConfigOverrides>
</Config>
 
Last edited by a moderator:
Everything up and running, got the BOB and MAW 1943 sorted. Just got to sort my joystick out..Cheers guys
 
You must log in or register to reply here.
Back
Top