• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Maryadi's MV22B Osprey Rel2.0 released

beside the light issue, is other animation, button light, PFD/MFD,CDU works? I just want make sure that dll gauge working.
you can give screenshot if you want
 
kalong said:
beside the light issue, is other animation, button light, PFD/MFD,CDU works? I just want make sure that dll gauge working.
you can give screenshot if you want
Click to expand...

Hello!
I'd have to further check but now I'm out of home...
ASAP I'll do it. THANK YOU
 
manfredc3 said:
I am one of those new readers of this thread, and downloaded this gem from the SOH site.

I also enjoyed reading this thread from the first post all the way through the one before this post.

This certainly is taking me to a totally different flight sim experience. I know it will be a steep learning curve. YES, I will "Read TFM", lol. Even though I am, like any man, used to "just dive in" to come to the conclusion that reading the manual will help getting to grips with any new "toy", or explain why something is not working the way I thought it would.

But at least I will not blame it on the product, but always say: "the issue is between the keyboard/mouse and the chair". This ends up being true most of the time.

I would like to take the opportunity to thank Maryadi, Rob and anyone else involved in this project for all their efforts in bringing this beautiful rendition to the flight sim community.
Click to expand...
Thanks for putting things into perspective ...
Cheers, Rob
 
Can you advise which key on the keyboard is the "TAB" key so I can change the values on the EICAS?

Thank you,
Reggie
 
Manfred, you have a way with words! I say that most of my problems are caused by the "Loose Nut Behind the Wheel".
 
ReggieC said:
Can you advise which key on the keyboard is the "TAB" key so I can change the values on the EICAS?

Thank you,
Reggie
Click to expand...

It should be just above the Caps Lock key.

attachment.php
 

Attachments

  • index.jpeg
    index.jpeg
    6.4 KB · Views: 23
just push and hold TAB key, still holding it, push any other key, a character will show up in EICAS.
 
Autopilot

Thanks Rob for the note on autopilot. I appreciate it. Went in and recalibrated axis and works fine now.

Bill:encouragement:
 
With the APU on, and the CDU & MFD switch ON there are no CRT displays. See red arrows. What did I miss? It is hit and miss with these displays screens
(display/no display)
Capture.jpg
 
Josh/Heater said:
As I said before, most knobs only work by using the scroll wheel on your mouse. Left click and dragging does not work on the APU.

You must hover your mouse over the APU Knob and use the middle scroll wheel (without clicking it in i might add) to turn the knob to the RUN/ENGAGE position.


Yessir,
Just in case you weren't aware, there are two switches in the left overhead panel that turn on the blade tip lights.
Looking backwards towards them, the one on the right, is like the "master switch". Left click that to get it into NORMAL position.
The switch on the left is a three way switch; TOP-OFF-BOTTOM. By default, this is in the OFF position. Move the switch into either TOP or BOTTOM, depending on what side you want the blade tip lights to show.
Click to expand...

I had to use some keys to pan up to find those switches. In a normal overhead view, these switches are not visible within the screen parameters. I have to manipulate some key to move the overhead
view to where those switches are visible.
Capture.jpg
 
I am finding that the switches knobs and levers are functioning fine, if not slowly due to my computer specs. The mouse scroll wheel works way better than trying to use the mouse click and drag method. Yeah, like grey eagle describes, you kinda have to stand on your head and look upside down to find the proptip light switches, but no big deal. Looks great in the outside view.

attachment.php
 

Attachments

  • Proptip lights.jpg
    Proptip lights.jpg
    34.9 KB · Views: 23
gray eagle said:
With the APU on, and the CDU & MFD switch ON there are no CRT displays. See red arrows. What did I miss? It is hit and miss with these displays screens
(display/no display)
Click to expand...
According to your picture, Avionics does not seem to been ON (center button just above StarterLevers)

Don't give up ... you'll get it in the end ...LoL

Cheers,
Rob
 
Yes, the lights do work fine. My point ^ was to make known that on my rig those prop rotor light switches were not within the normal overhead view I saw on my screen. I had to scan upwards to find them.

Obviously, I found the prop rotor light switches
Capture.jpg


This is my normal overhead view -
Capture.jpg
 
rcbarend said:
According to your picture, Avionics does not seem to been ON (center button just above StarterLevers)

Don't give up ... you'll get it in the end ...LoL

Cheers,
Rob
Click to expand...

Thanks for the help. :encouragement: Slowly, but surely, I am learning where all the bells and switches are. This is one nice and cleverly put together addon :encouragement:
A bit of a challenge and sometimes overwhelming, but as I learn how to operate it, I like it more and more. :adoration:
 
gray eagle said:
Yes, the lights do work fine. My point ^ was to make known that on my rig those prop rotor light switches were not within the normal overhead view I saw on my screen. I had to scan upwards to find them.

Obviously, I found the prop rotor light switches
Click to expand...
In FSX-Accel, I have the same problem.
(there seem to be some subtill deviations between camera positioning in FSX and P3D)

Solution:
You can make a small change in the aircraft.cfg to solve that.
Find line
InitialPbh=-40.0, 0, 0
in section
[CameraDefinition.6]

And change -40.0 into -57.0.
Which will pitch up the camera view a bit more, so you'll see the switches.

Rob
 
rcbarend said:
In FSX-Accel, I have the same problem.
(there seem to be some subtill deviations between camera positioning in FSX and P3D)

Solution:
You can make a small change in the aircraft.cfg to solve that.
Find line
InitialPbh=-40.0, 0, 0
in section
[CameraDefinition.6]

And change -40.0 into -57.0.
Which will pitch up the camera view a bit more, so you'll see the switches.

Rob
Click to expand...

Thanks, Rob! No more standing on my head to get to those switches.

UPDATE: Perfect!:encouragement:

attachment.php
 

Attachments

  • overhead panel.jpg
    overhead panel.jpg
    36 KB · Views: 52
Last edited:
rcbarend said:
In FSX-Accel, I have the same problem.
(there seem to be some subtill deviations between camera positioning in FSX and P3D)

Solution:
You can make a small change in the aircraft.cfg to solve that.
Find line
InitialPbh=-40.0, 0, 0
in section
[CameraDefinition.6]

And change -40.0 into -57.0.
Which will pitch up the camera view a bit more, so you'll see the switches.

Rob
Click to expand...


This is view results using those numbers: (not quite there - meaning, those switches are almost viewable -not quite - sacrifice cropping bottom view details.

Capture.jpg



Edit: Suggestion, how about adding another camera view of just those prop rotor tip light switches - add it to the other drop downs in the cockpit views? I'd do it but don't know how.
 
gray eagle said:
This is view results using those numbers: (not quite there - meaning, those switches are almost viewable -not quite - sacrifice cropping bottom view details.

.
Click to expand...
If I compare the pictures of the overhead camera made by you and Mr. Zippy, you are zoomed in too much.
Try to zoom out to the default 0.4 for that camera.

(you may have saved a flight with the Overhead camera not in default zoom, defined at 0.4; meaning that if you load that flight, it uses the saved zoom, NOT the default from the aircraft.cfg)

Rob
 
You must log in or register to reply here.
Back
Top