-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
The Fravin C150 L upgraded to FSX & P3D
- Thread starter lagaffe
- Start date
-
- Tags
- acceleration fsx-sp2 p3d
Hi,
my compliments to the team that design this aircraft: it is very nice to fly it.
I am not a real pilot, but I observed that to make a coordinated turn is necessary to use a little rudder compared to what is used in other aircraft that fly in FSX (ex. P92).
Is it the same in the real flight ?
cheers Marco
my compliments to the team that design this aircraft: it is very nice to fly it.
I am not a real pilot, but I observed that to make a coordinated turn is necessary to use a little rudder compared to what is used in other aircraft that fly in FSX (ex. P92).
Is it the same in the real flight ?
cheers Marco
Lane Street
Charter Member
This is fantastic, one of my FS9 faves now in FSX native format.
One less reason to start FS9.
Can anybody else verify a non-working ADF?
I can tune the station and hear the identifier yet get no needle movement.
cheers,
Lane
One less reason to start FS9.
Can anybody else verify a non-working ADF?
I can tune the station and hear the identifier yet get no needle movement.
cheers,
Lane
lagaffe
Members +
@Aussieman:
The FS9 paintkit is available at: http://www.fs-tutorials.com/en/down_plane_C150_01.php
Make your repaint and don't forget to transform it in DDS format
@Lane Street:
This ADF needle has a bug: I work to solve it ... it will be correct in the next version (no date for the moment).
The FS9 paintkit is available at: http://www.fs-tutorials.com/en/down_plane_C150_01.php
Make your repaint and don't forget to transform it in DDS format
@Lane Street:
This ADF needle has a bug: I work to solve it ... it will be correct in the next version (no date for the moment).
Lane Street
Charter Member
Thanks for the confirmation about the ADF needle.
Another thing I noticed is that the textures are not set up properly for speculars.
For at least the exterior and the wings, the diffuse and the speculars are assigned to the same file name.
That does not work. If that could also be fixed in the update, I would appreciate it. As would other painters, I suppose.
cheers,
Lane
Another thing I noticed is that the textures are not set up properly for speculars.
For at least the exterior and the wings, the diffuse and the speculars are assigned to the same file name.
That does not work. If that could also be fixed in the update, I would appreciate it. As would other painters, I suppose.
cheers,
Lane
.
lagaffe
Members +
@Lane Street:
This first version was centred on the model 3D and the cockpit. Textures used in this version are theses ones of Yves Franckart.
Textures bump and specular should be added in the next version an also a damage mod would be adapted form Ismael's works.
@Slider:
During this week, French-VFR has received more than 200 visits and 1100 downloads for the Cessna so I think that you should retry this week-end with more success.
This first version was centred on the model 3D and the cockpit. Textures used in this version are theses ones of Yves Franckart.
Textures bump and specular should be added in the next version an also a damage mod would be adapted form Ismael's works.
@Slider:
During this week, French-VFR has received more than 200 visits and 1100 downloads for the Cessna so I think that you should retry this week-end with more success.
Roger
Senior Administrator
Does anyone know who's repaint and where it can be downloaded from? A few people have asked me and after several searches I can't find it and it was probably 8 or 9 years ago that I obtained it.
Okay, got me a pilot!
Thank you! I didn´t see that...
Sadly there are not too many non-French repaints available. At least I don´t find them. That metal repaint in Rogers picture would be great and some Canadian, US and UK registers as well.
lagaffe
Members +
If you find US repaints for this plane ... you can find on AVSim and search "Cessna Fravin": I will find [FONT=verdana, sans-serif]N11530 &[FONT=verdana, sans-serif] N5261Q.
[/FONT][FONT=verdana, sans-serif]I think that the OH-CGL texture will be made by Yves Franckart [/FONT][/FONT]because I saw it on "http://users.skynet.be/fravinguidee/creation.html". I try to find it ant I if I succeed I will upgrade this post.
[/FONT][FONT=verdana, sans-serif]I think that the OH-CGL texture will be made by Yves Franckart [/FONT][/FONT]because I saw it on "http://users.skynet.be/fravinguidee/creation.html". I try to find it ant I if I succeed I will upgrade this post.
gray eagle
SOH-CM-2025
Scratchy Glass
Nice Plane however for some reason, The view out of the windshield looks a little scratchy, I see some other postings here that have clear looking windshield.
Guess I need to get out the Glass Wax!!
View attachment 2852
Nice Plane however for some reason, The view out of the windshield looks a little scratchy, I see some other postings here that have clear looking windshield.
Guess I need to get out the Glass Wax!!
View attachment 2852
gray eagle
SOH-CM-2025
Clearer Windshield in N2927t
I got the Grasshopper repaints which included the BLue N2927T like the one TUFUN displayed and the windshield is much clearer and better then the other stock one I posted. (See above) ^
Go figure. Book em' Danno!!!!
View attachment 2857
I got the Grasshopper repaints which included the BLue N2927T like the one TUFUN displayed and the windshield is much clearer and better then the other stock one I posted. (See above) ^
Go figure. Book em' Danno!!!!
View attachment 2857
Roger
Senior Administrator
gray eagle
SOH-CM-2025
Many thanks lagaffe
Just a HU, I got the Texture 11530 from AVSIM and the files are in BMP mode and when I added it to the core C150, it did not show in the FSX previews.
The grasshopper repaints are compatible and all are in dds format
BTW, The Grasshopper repaints have a better looking windshield the the stock one, much clearer and not as scratchy looking. I have made post above
with attached pics to illustrate this ^.
Lane Street
Charter Member
That paint is included in the FS9 version and is also in the paint kit, except for the registration.
cheers,
Lane
lagaffe
Members +
It is not Grasshopper but Grennhopper repaints, and they are on French-VFR in the downloads section "Aircraft's repaints" (use the English flap on the top left of the banner).
@gray eagle :
It's very strange because this artefacts are due to the glass_CV.dds texture and they are compiled in the 3D model.
If this texture is'nt in the "Cessna 150L\texture.N2927T" directory, FSX call it from "Cessna 150L\texture" directory.
So you can use PSP or The Gimp to modified glass_CV.dds and solve your problem:
- backup the glass_CV.dds file
- with DXT2Bmp ou ImageTool convert this file in BMP (24bits)
- modify the opacity caracteristic of this file (75%) and save it (24 bits)
- convert this new BMP to DDS (DXT3) and enjoy !
I will publish a v1.5 with two glass_CV.dds file: this one and another more clean for all convenience.
Another 3D model will be joined: a Texas Taildragger with a 160 cv and a US repaint !
@gray eagle :
It's very strange because this artefacts are due to the glass_CV.dds texture and they are compiled in the 3D model.
If this texture is'nt in the "Cessna 150L\texture.N2927T" directory, FSX call it from "Cessna 150L\texture" directory.
So you can use PSP or The Gimp to modified glass_CV.dds and solve your problem:
- backup the glass_CV.dds file
- with DXT2Bmp ou ImageTool convert this file in BMP (24bits)
- modify the opacity caracteristic of this file (75%) and save it (24 bits)
- convert this new BMP to DDS (DXT3) and enjoy !
I will publish a v1.5 with two glass_CV.dds file: this one and another more clean for all convenience.
Another 3D model will be joined: a Texas Taildragger with a 160 cv and a US repaint !
Paul Anderson
Charter Member
Some of the paints have glass_cv.dds and glass_ext.dds textures in them. (FBXNS, FGAQC, FGHJK, SAMU)
SAMU glass_cv.dds appears to be a copy of glass_ext.dds so guess should show scratch free. (is also interior reflection free, prefer the fallback)
When the textures are in the paint folder they are used instead of the ones in the fallback texture folder.
If you like the fallback glass textures better, rename the files mentioned in above paints adding .old or .orig to the end (after the .dds).
(just my two cents worth, don't worry about currency conversion to Canadian, we don't deal in pennies now
)
SAMU glass_cv.dds appears to be a copy of glass_ext.dds so guess should show scratch free. (is also interior reflection free, prefer the fallback)
When the textures are in the paint folder they are used instead of the ones in the fallback texture folder.
If you like the fallback glass textures better, rename the files mentioned in above paints adding .old or .orig to the end (after the .dds).
(just my two cents worth, don't worry about currency conversion to Canadian, we don't deal in pennies now
)
lagaffe
Members +
Very good suggestions !
For the next Texas Taildragger, I have choose the modele described on this site : http://www.toandos.com/DC152.html
For the next Texas Taildragger, I have choose the modele described on this site : http://www.toandos.com/DC152.html